TraceMapboxStyle Type

Namespace: Plotly.NET
Assembly: Plotly.NET.dll
Base Type: obj

Constructors

Constructor Description

TraceMapboxStyle()

Full Usage: TraceMapboxStyle()

Returns: TraceMapboxStyle

Returns: TraceMapboxStyle

Static members

Static member Description

TraceMapboxStyle.ChoroplethMapbox(?Name, ?Visible, ?ShowLegend, ?LegendRank, ?LegendGroup, ?LegendGroupTitle, ?Ids, ?Z, ?GeoJson, ?FeatureIdKey, ?Locations, ?Text, ?MultiText, ?HoverText, ?MultiHoverText, ?HoverInfo, ?HoverTemplate, ?MultiHoverTemplate, ?Meta, ?CustomData, ?SubPlot, ?ColorAxis, ?Marker, ?ColorBar, ?AutoColorScale, ?ColorScale, ?ShowScale, ?ReverseScale, ?ZAuto, ?Zmax, ?Zmid, ?Zmin, ?SelectedPoints, ?Selected, ?Unselected, ?Below, ?HoverLabel, ?UIRevision)

Full Usage: TraceMapboxStyle.ChoroplethMapbox(?Name, ?Visible, ?ShowLegend, ?LegendRank, ?LegendGroup, ?LegendGroupTitle, ?Ids, ?Z, ?GeoJson, ?FeatureIdKey, ?Locations, ?Text, ?MultiText, ?HoverText, ?MultiHoverText, ?HoverInfo, ?HoverTemplate, ?MultiHoverTemplate, ?Meta, ?CustomData, ?SubPlot, ?ColorAxis, ?Marker, ?ColorBar, ?AutoColorScale, ?ColorScale, ?ShowScale, ?ReverseScale, ?ZAuto, ?Zmax, ?Zmid, ?Zmin, ?SelectedPoints, ?Selected, ?Unselected, ?Below, ?HoverLabel, ?UIRevision)

Parameters:
    ?Name : string - Sets the trace name. The trace name appear as the legend item and on hover.
    ?Visible : Visible - Determines whether or not this trace is visible. If "legendonly", the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).
    ?ShowLegend : bool - Determines whether or not an item corresponding to this trace is shown in the legend.
    ?LegendRank : int - Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with `"reversed" `legend.traceorder` they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items.
    ?LegendGroup : string - Sets the legend group for this trace. Traces part of the same legend group hide/show at the same time when toggling legend items.
    ?LegendGroupTitle : Title - Sets the legend group title for this trace.
    ?Ids : seq<'c> - Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.
    ?Z : seq<'d> - Sets the color values.
    ?GeoJson : obj - Sets the GeoJSON data associated with this trace. It can be set as a valid GeoJSON object or as a URL string. Note that we only accept GeoJSONs of type "FeatureCollection" or "Feature" with geometries of type "Polygon" or "MultiPolygon".
    ?FeatureIdKey : string - Sets the key in GeoJSON features which is used as id to match the items included in the `locations` array. Support nested property, for example "properties.name".
    ?Locations : seq<string> - Sets which features found in "geojson" to plot using their feature `id` field.
    ?Text : 'e - Sets text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. If trace `hoverinfo` contains a "text" flag and "hovertext" is not set, these elements will be seen in the hover labels.
    ?MultiText : seq<'e> - Sets text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. If trace `hoverinfo` contains a "text" flag and "hovertext" is not set, these elements will be seen in the hover labels.
    ?HoverText : string - Sets hover text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. To be seen, trace `hoverinfo` must contain a "text" flag.
    ?MultiHoverText : seq<string> - Sets hover text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. To be seen, trace `hoverinfo` must contain a "text" flag.
    ?HoverInfo : HoverInfo - Determines which trace information appear on hover. If `none` or `skip` are set, no information is displayed upon hovering. But, if `none` is set, click and hover events are still fired.
    ?HoverTemplate : string - Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, "xother" will be added to those with different x positions from the first point. An underscore before or after "(x|y)other" will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. variable `norm` Anything contained in tag `` is displayed in the secondary box, for example "{fullData.name}". To hide the secondary box completely, use an empty tag ``.
    ?MultiHoverTemplate : seq<string> - Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, "xother" will be added to those with different x positions from the first point. An underscore before or after "(x|y)other" will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. variable `norm` Anything contained in tag `` is displayed in the secondary box, for example "{fullData.name}". To hide the secondary box completely, use an empty tag ``.
    ?Meta : string - Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace `name`, graph, axis and colorbar `title.text`, annotation `text` `rangeselector`, `updatemenues` and `sliders` `label` text all support `meta`. To access the trace `meta` values in an attribute in the same trace, simply use `%{meta[i]}` where `i` is the index or key of the `meta` item in question. To access trace `meta` in layout attributes, use `%{data[n[.meta[i]}` where `i` is the index or key of the `meta` and `n` is the trace index.
    ?CustomData : seq<'f> - Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, "scatter" traces also appends customdata items in the markers DOM elements
    ?SubPlot : SubPlotId - Sets a reference between this trace's data coordinates and a mapbox subplot. If "mapbox" (the default value), the data refer to `layout.mapbox`. If "mapbox2", the data refer to `layout.mapbox2`, and so on.
    ?ColorAxis : SubPlotId - Sets a reference to a shared color axis. References to these shared color axes are "coloraxis", "coloraxis2", "coloraxis3", etc. Settings for these shared color axes are set in the layout, under `layout.coloraxis`, `layout.coloraxis2`, etc. Note that multiple color scales can be linked to the same color axis.
    ?Marker : Marker - Sets the marker of this trace.
    ?ColorBar : ColorBar - Sets the color bar of this trace.
    ?AutoColorScale : bool - Determines whether the colorscale is a default palette (`autocolorscale: true`) or the palette determined by `colorscale`. In case `colorscale` is unspecified or `autocolorscale` is true, the default palette will be chosen according to whether numbers in the `color` array are all positive, all negative or mixed.
    ?ColorScale : Colorscale - Sets the colorscale. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, `[[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]`. To control the bounds of the colorscale in color space, use`zmin` and `zmax`. Alternatively, `colorscale` may be a palette name string of the following list: Blackbody,Bluered,Blues,Cividis,Earth,Electric,Greens,Greys,Hot,Jet,Picnic,Portland,Rainbow,RdBu,Reds,Viridis,YlGnBu,YlOrRd.
    ?ShowScale : bool - Determines whether or not a colorbar is displayed for this trace.
    ?ReverseScale : bool - Reverses the color mapping if true. If true, `zmin` will correspond to the last color in the array and `zmax` will correspond to the first color.
    ?ZAuto : bool - Determines whether or not the color domain is computed with respect to the input data (here in `z`) or the bounds set in `zmin` and `zmax` Defaults to `false` when `zmin` and `zmax` are set by the user.
    ?Zmax : float - Sets the upper bound of the color domain. Value should have the same units as in `z` and if set, `zmin` must be set as well.
    ?Zmid : float - Sets the mid-point of the color domain by scaling `zmin` and/or `zmax` to be equidistant to this point. Value should have the same units as in `z`. Has no effect when `zauto` is `false`.
    ?Zmin : float - Sets the lower bound of the color domain. Value should have the same units as in `z` and if set, `zmax` must be set as well.
    ?SelectedPoints : seq<'g> - Array containing integer indices of selected points. Has an effect only for traces that support selections. Note that an empty array means an empty selection where the `unselected` are turned on for all points, whereas, any other non-array values means no selection all where the `selected` and `unselected` styles have no effect.
    ?Selected : TraceSelection - Sets the style of selected points of this trace.
    ?Unselected : TraceSelection - Sets the style of unselected points of this trace.
    ?Below : string - Determines if the choropleth polygons will be inserted before the layer with the specified ID. By default, choroplethmapbox traces are placed above the water layers. If set to '', the layer will be inserted above every existing layer.
    ?HoverLabel : Hoverlabel - Sets the style of the hoverlabels of this trace.
    ?UIRevision : string - Controls persistence of some user-driven changes to the trace: `constraintrange` in `parcoords` traces, as well as some `editable: true` modifications such as `name` and `colorbar.title`. Defaults to `layout.uirevision`. Note that other user-driven trace attribute changes are controlled by `layout` attributes: `trace.visible` is controlled by `layout.legend.uirevision`, `selectedpoints` is controlled by `layout.selectionrevision`, and `colorbar.(x|y)` (accessible with `config: {editable: true}`) is controlled by `layout.editrevision`. Trace changes are tracked by `uid`, which only falls back on trace index if no `uid` is provided. So if your app can add/remove traces before the end of the `data` array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a `uid` that stays with it as it moves.

Returns: 'h -> 'h

Create a function that applies the styles of a choropleth mapbox plot to a Trace object

?Name : string

Sets the trace name. The trace name appear as the legend item and on hover.

?Visible : Visible

Determines whether or not this trace is visible. If "legendonly", the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).

?ShowLegend : bool

Determines whether or not an item corresponding to this trace is shown in the legend.

?LegendRank : int

Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with `"reversed" `legend.traceorder` they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items.

?LegendGroup : string

Sets the legend group for this trace. Traces part of the same legend group hide/show at the same time when toggling legend items.

?LegendGroupTitle : Title

Sets the legend group title for this trace.

?Ids : seq<'c>

Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.

?Z : seq<'d>

Sets the color values.

?GeoJson : obj

Sets the GeoJSON data associated with this trace. It can be set as a valid GeoJSON object or as a URL string. Note that we only accept GeoJSONs of type "FeatureCollection" or "Feature" with geometries of type "Polygon" or "MultiPolygon".

?FeatureIdKey : string

Sets the key in GeoJSON features which is used as id to match the items included in the `locations` array. Support nested property, for example "properties.name".

?Locations : seq<string>

Sets which features found in "geojson" to plot using their feature `id` field.

?Text : 'e

Sets text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. If trace `hoverinfo` contains a "text" flag and "hovertext" is not set, these elements will be seen in the hover labels.

?MultiText : seq<'e>

Sets text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. If trace `hoverinfo` contains a "text" flag and "hovertext" is not set, these elements will be seen in the hover labels.

?HoverText : string

Sets hover text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. To be seen, trace `hoverinfo` must contain a "text" flag.

?MultiHoverText : seq<string>

Sets hover text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. To be seen, trace `hoverinfo` must contain a "text" flag.

?HoverInfo : HoverInfo

Determines which trace information appear on hover. If `none` or `skip` are set, no information is displayed upon hovering. But, if `none` is set, click and hover events are still fired.

?HoverTemplate : string

Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, "xother" will be added to those with different x positions from the first point. An underscore before or after "(x|y)other" will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. variable `norm` Anything contained in tag `` is displayed in the secondary box, for example "{fullData.name}". To hide the secondary box completely, use an empty tag ``.

?MultiHoverTemplate : seq<string>

Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, "xother" will be added to those with different x positions from the first point. An underscore before or after "(x|y)other" will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. variable `norm` Anything contained in tag `` is displayed in the secondary box, for example "{fullData.name}". To hide the secondary box completely, use an empty tag ``.

?Meta : string

Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace `name`, graph, axis and colorbar `title.text`, annotation `text` `rangeselector`, `updatemenues` and `sliders` `label` text all support `meta`. To access the trace `meta` values in an attribute in the same trace, simply use `%{meta[i]}` where `i` is the index or key of the `meta` item in question. To access trace `meta` in layout attributes, use `%{data[n[.meta[i]}` where `i` is the index or key of the `meta` and `n` is the trace index.

?CustomData : seq<'f>

Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, "scatter" traces also appends customdata items in the markers DOM elements

?SubPlot : SubPlotId

Sets a reference between this trace's data coordinates and a mapbox subplot. If "mapbox" (the default value), the data refer to `layout.mapbox`. If "mapbox2", the data refer to `layout.mapbox2`, and so on.

?ColorAxis : SubPlotId

Sets a reference to a shared color axis. References to these shared color axes are "coloraxis", "coloraxis2", "coloraxis3", etc. Settings for these shared color axes are set in the layout, under `layout.coloraxis`, `layout.coloraxis2`, etc. Note that multiple color scales can be linked to the same color axis.

?Marker : Marker

Sets the marker of this trace.

?ColorBar : ColorBar

Sets the color bar of this trace.

?AutoColorScale : bool

Determines whether the colorscale is a default palette (`autocolorscale: true`) or the palette determined by `colorscale`. In case `colorscale` is unspecified or `autocolorscale` is true, the default palette will be chosen according to whether numbers in the `color` array are all positive, all negative or mixed.

?ColorScale : Colorscale

Sets the colorscale. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, `[[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]`. To control the bounds of the colorscale in color space, use`zmin` and `zmax`. Alternatively, `colorscale` may be a palette name string of the following list: Blackbody,Bluered,Blues,Cividis,Earth,Electric,Greens,Greys,Hot,Jet,Picnic,Portland,Rainbow,RdBu,Reds,Viridis,YlGnBu,YlOrRd.

?ShowScale : bool

Determines whether or not a colorbar is displayed for this trace.

?ReverseScale : bool

Reverses the color mapping if true. If true, `zmin` will correspond to the last color in the array and `zmax` will correspond to the first color.

?ZAuto : bool

Determines whether or not the color domain is computed with respect to the input data (here in `z`) or the bounds set in `zmin` and `zmax` Defaults to `false` when `zmin` and `zmax` are set by the user.

?Zmax : float

Sets the upper bound of the color domain. Value should have the same units as in `z` and if set, `zmin` must be set as well.

?Zmid : float

Sets the mid-point of the color domain by scaling `zmin` and/or `zmax` to be equidistant to this point. Value should have the same units as in `z`. Has no effect when `zauto` is `false`.

?Zmin : float

Sets the lower bound of the color domain. Value should have the same units as in `z` and if set, `zmax` must be set as well.

?SelectedPoints : seq<'g>

Array containing integer indices of selected points. Has an effect only for traces that support selections. Note that an empty array means an empty selection where the `unselected` are turned on for all points, whereas, any other non-array values means no selection all where the `selected` and `unselected` styles have no effect.

?Selected : TraceSelection

Sets the style of selected points of this trace.

?Unselected : TraceSelection

Sets the style of unselected points of this trace.

?Below : string

Determines if the choropleth polygons will be inserted before the layer with the specified ID. By default, choroplethmapbox traces are placed above the water layers. If set to '', the layer will be inserted above every existing layer.

?HoverLabel : Hoverlabel

Sets the style of the hoverlabels of this trace.

?UIRevision : string

Controls persistence of some user-driven changes to the trace: `constraintrange` in `parcoords` traces, as well as some `editable: true` modifications such as `name` and `colorbar.title`. Defaults to `layout.uirevision`. Note that other user-driven trace attribute changes are controlled by `layout` attributes: `trace.visible` is controlled by `layout.legend.uirevision`, `selectedpoints` is controlled by `layout.selectionrevision`, and `colorbar.(x|y)` (accessible with `config: {editable: true}`) is controlled by `layout.editrevision`. Trace changes are tracked by `uid`, which only falls back on trace index if no `uid` is provided. So if your app can add/remove traces before the end of the `data` array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a `uid` that stays with it as it moves.

Returns: 'h -> 'h

TraceMapboxStyle.DensityMapbox(?Name, ?Visible, ?ShowLegend, ?LegendRank, ?LegendGroup, ?LegendGroupTitle, ?Opacity, ?Ids, ?Z, ?Radius, ?Lat, ?Lon, ?Text, ?MultiText, ?HoverText, ?MultiHoverText, ?HoverInfo, ?HoverTemplate, ?MultiHoverTemplate, ?Meta, ?CustomData, ?SubPlot, ?ColorAxis, ?Marker, ?ColorBar, ?AutoColorScale, ?ColorScale, ?ShowScale, ?ReverseScale, ?ZAuto, ?Zmin, ?Zmid, ?Zmax, ?Below, ?HoverLabel, ?UIRevision)

Full Usage: TraceMapboxStyle.DensityMapbox(?Name, ?Visible, ?ShowLegend, ?LegendRank, ?LegendGroup, ?LegendGroupTitle, ?Opacity, ?Ids, ?Z, ?Radius, ?Lat, ?Lon, ?Text, ?MultiText, ?HoverText, ?MultiHoverText, ?HoverInfo, ?HoverTemplate, ?MultiHoverTemplate, ?Meta, ?CustomData, ?SubPlot, ?ColorAxis, ?Marker, ?ColorBar, ?AutoColorScale, ?ColorScale, ?ShowScale, ?ReverseScale, ?ZAuto, ?Zmin, ?Zmid, ?Zmax, ?Below, ?HoverLabel, ?UIRevision)

Parameters:
    ?Name : string - Sets the trace name. The trace name appear as the legend item and on hover.
    ?Visible : Visible - Determines whether or not this trace is visible. If "legendonly", the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).
    ?ShowLegend : bool - Determines whether or not an item corresponding to this trace is shown in the legend.
    ?LegendRank : int - Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with `"reversed" `legend.traceorder` they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items.
    ?LegendGroup : string - Sets the legend group for this trace. Traces part of the same legend group hide/show at the same time when toggling legend items.
    ?LegendGroupTitle : Title - Sets the legend group title for this trace.
    ?Opacity : float - Sets the opacity of the trace.
    ?Ids : seq<'e> - Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.
    ?Z : seq<'f> - Sets the points' weight. For example, a value of 10 would be equivalent to having 10 points of weight 1 in the same spot
    ?Radius : int - Sets the radius of influence of one `lon` / `lat` point in pixels. Increasing the value makes the densitymapbox trace smoother, but less detailed.
    ?Lat : seq<'g> - Sets the latitude coordinates (in degrees North).
    ?Lon : seq<'h> - Sets the longitude coordinates (in degrees East).
    ?Text : 'i - Sets text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. If trace `hoverinfo` contains a "text" flag and "hovertext" is not set, these elements will be seen in the hover labels.
    ?MultiText : seq<'i> - Sets text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. If trace `hoverinfo` contains a "text" flag and "hovertext" is not set, these elements will be seen in the hover labels.
    ?HoverText : string - Sets hover text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. To be seen, trace `hoverinfo` must contain a "text" flag.
    ?MultiHoverText : seq<string> - Sets hover text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. To be seen, trace `hoverinfo` must contain a "text" flag.
    ?HoverInfo : HoverInfo - Determines which trace information appear on hover. If `none` or `skip` are set, no information is displayed upon hovering. But, if `none` is set, click and hover events are still fired.
    ?HoverTemplate : string - Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, "xother" will be added to those with different x positions from the first point. An underscore before or after "(x|y)other" will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. variable `norm` Anything contained in tag `` is displayed in the secondary box, for example "{fullData.name}". To hide the secondary box completely, use an empty tag ``.
    ?MultiHoverTemplate : seq<string> - Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, "xother" will be added to those with different x positions from the first point. An underscore before or after "(x|y)other" will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. variable `norm` Anything contained in tag `` is displayed in the secondary box, for example "{fullData.name}". To hide the secondary box completely, use an empty tag ``.
    ?Meta : string - Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace `name`, graph, axis and colorbar `title.text`, annotation `text` `rangeselector`, `updatemenues` and `sliders` `label` text all support `meta`. To access the trace `meta` values in an attribute in the same trace, simply use `%{meta[i]}` where `i` is the index or key of the `meta` item in question. To access trace `meta` in layout attributes, use `%{data[n[.meta[i]}` where `i` is the index or key of the `meta` and `n` is the trace index.
    ?CustomData : seq<'j> - Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, "scatter" traces also appends customdata items in the markers DOM elements
    ?SubPlot : SubPlotId - Sets a reference between this trace's data coordinates and a mapbox subplot. If "mapbox" (the default value), the data refer to `layout.mapbox`. If "mapbox2", the data refer to `layout.mapbox2`, and so on.
    ?ColorAxis : SubPlotId - Sets a reference to a shared color axis. References to these shared color axes are "coloraxis", "coloraxis2", "coloraxis3", etc. Settings for these shared color axes are set in the layout, under `layout.coloraxis`, `layout.coloraxis2`, etc. Note that multiple color scales can be linked to the same color axis.
    ?Marker : Marker - Sets the marker of this trace.
    ?ColorBar : ColorBar - Sets the color bar of this trace.
    ?AutoColorScale : bool - Determines whether the colorscale is a default palette (`autocolorscale: true`) or the palette determined by `colorscale`. In case `colorscale` is unspecified or `autocolorscale` is true, the default palette will be chosen according to whether numbers in the `color` array are all positive, all negative or mixed.
    ?ColorScale : Colorscale - Sets the colorscale. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, `[[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]`. To control the bounds of the colorscale in color space, use`zmin` and `zmax`. Alternatively, `colorscale` may be a palette name string of the following list: Blackbody,Bluered,Blues,Cividis,Earth,Electric,Greens,Greys,Hot,Jet,Picnic,Portland,Rainbow,RdBu,Reds,Viridis,YlGnBu,YlOrRd.
    ?ShowScale : bool - Determines whether or not a colorbar is displayed for this trace.
    ?ReverseScale : bool - Reverses the color mapping if true. If true, `zmin` will correspond to the last color in the array and `zmax` will correspond to the first color.
    ?ZAuto : bool - Determines whether or not the color domain is computed with respect to the input data (here in `z`) or the bounds set in `zmin` and `zmax` Defaults to `false` when `zmin` and `zmax` are set by the user.
    ?Zmin : float - Sets the lower bound of the color domain. Value should have the same units as in `z` and if set, `zmax` must be set as well.
    ?Zmid : float - Sets the mid-point of the color domain by scaling `zmin` and/or `zmax` to be equidistant to this point. Value should have the same units as in `z`. Has no effect when `zauto` is `false`.
    ?Zmax : float - Sets the upper bound of the color domain. Value should have the same units as in `z` and if set, `zmin` must be set as well.
    ?Below : string - Determines if the densitymapbox trace will be inserted before the layer with the specified ID. By default, densitymapbox traces are placed below the first layer of type symbol If set to '', the layer will be inserted above every existing layer.
    ?HoverLabel : Hoverlabel - Sets the style of the hoverlabels of this trace.
    ?UIRevision : string - Controls persistence of some user-driven changes to the trace: `constraintrange` in `parcoords` traces, as well as some `editable: true` modifications such as `name` and `colorbar.title`. Defaults to `layout.uirevision`. Note that other user-driven trace attribute changes are controlled by `layout` attributes: `trace.visible` is controlled by `layout.legend.uirevision`, `selectedpoints` is controlled by `layout.selectionrevision`, and `colorbar.(x|y)` (accessible with `config: {editable: true}`) is controlled by `layout.editrevision`. Trace changes are tracked by `uid`, which only falls back on trace index if no `uid` is provided. So if your app can add/remove traces before the end of the `data` array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a `uid` that stays with it as it moves.

Returns: 'k -> 'k

Create a function that applies the styles of a density mapbox plot to a Trace object

?Name : string

Sets the trace name. The trace name appear as the legend item and on hover.

?Visible : Visible

Determines whether or not this trace is visible. If "legendonly", the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).

?ShowLegend : bool

Determines whether or not an item corresponding to this trace is shown in the legend.

?LegendRank : int

Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with `"reversed" `legend.traceorder` they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items.

?LegendGroup : string

Sets the legend group for this trace. Traces part of the same legend group hide/show at the same time when toggling legend items.

?LegendGroupTitle : Title

Sets the legend group title for this trace.

?Opacity : float

Sets the opacity of the trace.

?Ids : seq<'e>

Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.

?Z : seq<'f>

Sets the points' weight. For example, a value of 10 would be equivalent to having 10 points of weight 1 in the same spot

?Radius : int

Sets the radius of influence of one `lon` / `lat` point in pixels. Increasing the value makes the densitymapbox trace smoother, but less detailed.

?Lat : seq<'g>

Sets the latitude coordinates (in degrees North).

?Lon : seq<'h>

Sets the longitude coordinates (in degrees East).

?Text : 'i

Sets text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. If trace `hoverinfo` contains a "text" flag and "hovertext" is not set, these elements will be seen in the hover labels.

?MultiText : seq<'i>

Sets text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. If trace `hoverinfo` contains a "text" flag and "hovertext" is not set, these elements will be seen in the hover labels.

?HoverText : string

Sets hover text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. To be seen, trace `hoverinfo` must contain a "text" flag.

?MultiHoverText : seq<string>

Sets hover text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. To be seen, trace `hoverinfo` must contain a "text" flag.

?HoverInfo : HoverInfo

Determines which trace information appear on hover. If `none` or `skip` are set, no information is displayed upon hovering. But, if `none` is set, click and hover events are still fired.

?HoverTemplate : string

Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, "xother" will be added to those with different x positions from the first point. An underscore before or after "(x|y)other" will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. variable `norm` Anything contained in tag `` is displayed in the secondary box, for example "{fullData.name}". To hide the secondary box completely, use an empty tag ``.

?MultiHoverTemplate : seq<string>

Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, "xother" will be added to those with different x positions from the first point. An underscore before or after "(x|y)other" will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. variable `norm` Anything contained in tag `` is displayed in the secondary box, for example "{fullData.name}". To hide the secondary box completely, use an empty tag ``.

?Meta : string

Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace `name`, graph, axis and colorbar `title.text`, annotation `text` `rangeselector`, `updatemenues` and `sliders` `label` text all support `meta`. To access the trace `meta` values in an attribute in the same trace, simply use `%{meta[i]}` where `i` is the index or key of the `meta` item in question. To access trace `meta` in layout attributes, use `%{data[n[.meta[i]}` where `i` is the index or key of the `meta` and `n` is the trace index.

?CustomData : seq<'j>

Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, "scatter" traces also appends customdata items in the markers DOM elements

?SubPlot : SubPlotId

Sets a reference between this trace's data coordinates and a mapbox subplot. If "mapbox" (the default value), the data refer to `layout.mapbox`. If "mapbox2", the data refer to `layout.mapbox2`, and so on.

?ColorAxis : SubPlotId

Sets a reference to a shared color axis. References to these shared color axes are "coloraxis", "coloraxis2", "coloraxis3", etc. Settings for these shared color axes are set in the layout, under `layout.coloraxis`, `layout.coloraxis2`, etc. Note that multiple color scales can be linked to the same color axis.

?Marker : Marker

Sets the marker of this trace.

?ColorBar : ColorBar

Sets the color bar of this trace.

?AutoColorScale : bool

Determines whether the colorscale is a default palette (`autocolorscale: true`) or the palette determined by `colorscale`. In case `colorscale` is unspecified or `autocolorscale` is true, the default palette will be chosen according to whether numbers in the `color` array are all positive, all negative or mixed.

?ColorScale : Colorscale

Sets the colorscale. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, `[[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]`. To control the bounds of the colorscale in color space, use`zmin` and `zmax`. Alternatively, `colorscale` may be a palette name string of the following list: Blackbody,Bluered,Blues,Cividis,Earth,Electric,Greens,Greys,Hot,Jet,Picnic,Portland,Rainbow,RdBu,Reds,Viridis,YlGnBu,YlOrRd.

?ShowScale : bool

Determines whether or not a colorbar is displayed for this trace.

?ReverseScale : bool

Reverses the color mapping if true. If true, `zmin` will correspond to the last color in the array and `zmax` will correspond to the first color.

?ZAuto : bool

Determines whether or not the color domain is computed with respect to the input data (here in `z`) or the bounds set in `zmin` and `zmax` Defaults to `false` when `zmin` and `zmax` are set by the user.

?Zmin : float

Sets the lower bound of the color domain. Value should have the same units as in `z` and if set, `zmax` must be set as well.

?Zmid : float

Sets the mid-point of the color domain by scaling `zmin` and/or `zmax` to be equidistant to this point. Value should have the same units as in `z`. Has no effect when `zauto` is `false`.

?Zmax : float

Sets the upper bound of the color domain. Value should have the same units as in `z` and if set, `zmin` must be set as well.

?Below : string

Determines if the densitymapbox trace will be inserted before the layer with the specified ID. By default, densitymapbox traces are placed below the first layer of type symbol If set to '', the layer will be inserted above every existing layer.

?HoverLabel : Hoverlabel

Sets the style of the hoverlabels of this trace.

?UIRevision : string

Controls persistence of some user-driven changes to the trace: `constraintrange` in `parcoords` traces, as well as some `editable: true` modifications such as `name` and `colorbar.title`. Defaults to `layout.uirevision`. Note that other user-driven trace attribute changes are controlled by `layout` attributes: `trace.visible` is controlled by `layout.legend.uirevision`, `selectedpoints` is controlled by `layout.selectionrevision`, and `colorbar.(x|y)` (accessible with `config: {editable: true}`) is controlled by `layout.editrevision`. Trace changes are tracked by `uid`, which only falls back on trace index if no `uid` is provided. So if your app can add/remove traces before the end of the `data` array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a `uid` that stays with it as it moves.

Returns: 'k -> 'k

TraceMapboxStyle.ScatterMapbox(?Name, ?Visible, ?ShowLegend, ?LegendRank, ?LegendGroup, ?LegendGroupTitle, ?Opacity, ?Mode, ?Ids, ?Lat, ?Lon, ?Cluster, ?Text, ?MultiText, ?TextPosition, ?MultiTextPosition, ?TextTemplate, ?MultiTextTemplate, ?HoverText, ?MultiHoverText, ?HoverInfo, ?HoverTemplate, ?MultiHoverTemplate, ?Meta, ?CustomData, ?SubPlot, ?Marker, ?Line, ?TextFont, ?SelectedPoints, ?Selected, ?Unselected, ?Below, ?ConnectGaps, ?Fill, ?FillColor, ?HoverLabel, ?UIRevision)

Full Usage: TraceMapboxStyle.ScatterMapbox(?Name, ?Visible, ?ShowLegend, ?LegendRank, ?LegendGroup, ?LegendGroupTitle, ?Opacity, ?Mode, ?Ids, ?Lat, ?Lon, ?Cluster, ?Text, ?MultiText, ?TextPosition, ?MultiTextPosition, ?TextTemplate, ?MultiTextTemplate, ?HoverText, ?MultiHoverText, ?HoverInfo, ?HoverTemplate, ?MultiHoverTemplate, ?Meta, ?CustomData, ?SubPlot, ?Marker, ?Line, ?TextFont, ?SelectedPoints, ?Selected, ?Unselected, ?Below, ?ConnectGaps, ?Fill, ?FillColor, ?HoverLabel, ?UIRevision)

Parameters:
    ?Name : string - Sets the trace name. The trace name appear as the legend item and on hover.
    ?Visible : Visible - Determines whether or not this trace is visible. If "legendonly", the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).
    ?ShowLegend : bool - Determines whether or not an item corresponding to this trace is shown in the legend.
    ?LegendRank : int - Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with `"reversed" `legend.traceorder` they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items.
    ?LegendGroup : string - Sets the legend group for this trace. Traces part of the same legend group hide/show at the same time when toggling legend items.
    ?LegendGroupTitle : Title - Sets the legend group title for this trace.
    ?Opacity : float - Sets the opacity of the trace.
    ?Mode : Mode - Determines the drawing mode for this scatter trace. If the provided `mode` includes "text" then the `text` elements appear at the coordinates. Otherwise, the `text` elements appear on hover. If there are less than 20 points and the trace is not stacked then the default is "lines+markers". Otherwise, "lines".
    ?Ids : seq<'a> - Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.
    ?Lat : seq<'b> - Sets the latitude coordinates (in degrees North).
    ?Lon : seq<'c> - Sets the longitude coordinates (in degrees East).
    ?Cluster : MapboxCluster - Sets the clustering options for points on this trace.
    ?Text : 'd - Sets text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. If trace `hoverinfo` contains a "text" flag and "hovertext" is not set, these elements will be seen in the hover labels.
    ?MultiText : seq<'d> - Sets text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. If trace `hoverinfo` contains a "text" flag and "hovertext" is not set, these elements will be seen in the hover labels.
    ?TextPosition : TextPosition - Sets the positions of the `text` elements with respects to the (x,y) coordinates.
    ?MultiTextPosition : seq<TextPosition> - Sets the positions of the `text` elements with respects to the (x,y) coordinates.
    ?TextTemplate : string - Template string used for rendering the information text that appear on points. Note that this will override `textinfo`. Variables are inserted using %{variable}, for example "y: %{y}". Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. Every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available.
    ?MultiTextTemplate : seq<string> - Template string used for rendering the information text that appear on points. Note that this will override `textinfo`. Variables are inserted using %{variable}, for example "y: %{y}". Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. Every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available.
    ?HoverText : string - Sets hover text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. To be seen, trace `hoverinfo` must contain a "text" flag.
    ?MultiHoverText : seq<string> - Sets hover text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. To be seen, trace `hoverinfo` must contain a "text" flag.
    ?HoverInfo : HoverInfo - Determines which trace information appear on hover. If `none` or `skip` are set, no information is displayed upon hovering. But, if `none` is set, click and hover events are still fired.
    ?HoverTemplate : string - Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, "xother" will be added to those with different x positions from the first point. An underscore before or after "(x|y)other" will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. variable `norm` Anything contained in tag `` is displayed in the secondary box, for example "{fullData.name}". To hide the secondary box completely, use an empty tag ``.
    ?MultiHoverTemplate : seq<string> - Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, "xother" will be added to those with different x positions from the first point. An underscore before or after "(x|y)other" will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. variable `norm` Anything contained in tag `` is displayed in the secondary box, for example "{fullData.name}". To hide the secondary box completely, use an empty tag ``.
    ?Meta : string - Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace `name`, graph, axis and colorbar `title.text`, annotation `text` `rangeselector`, `updatemenues` and `sliders` `label` text all support `meta`. To access the trace `meta` values in an attribute in the same trace, simply use `%{meta[i]}` where `i` is the index or key of the `meta` item in question. To access trace `meta` in layout attributes, use `%{data[n[.meta[i]}` where `i` is the index or key of the `meta` and `n` is the trace index.
    ?CustomData : seq<'e> - Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, "scatter" traces also appends customdata items in the markers DOM elements
    ?SubPlot : SubPlotId - Sets a reference between this trace's data coordinates and a mapbox subplot. If "mapbox" (the default value), the data refer to `layout.mapbox`. If "mapbox2", the data refer to `layout.mapbox2`, and so on.
    ?Marker : Marker - Sets the marker of this trace.
    ?Line : Line - Sets the line of this trace
    ?TextFont : Font - Sets the text font of this trace
    ?SelectedPoints : seq<'f> - Array containing integer indices of selected points. Has an effect only for traces that support selections. Note that an empty array means an empty selection where the `unselected` are turned on for all points, whereas, any other non-array values means no selection all where the `selected` and `unselected` styles have no effect.
    ?Selected : TraceSelection - Sets the style of selected points of this trace.
    ?Unselected : TraceSelection - Sets the style of unselected points of this trace.
    ?Below : string - Determines if this scattermapbox trace's layers are to be inserted before the layer with the specified ID. By default, scattermapbox layers are inserted above all the base layers. To place the scattermapbox layers above every other layer, set `below` to "''".
    ?ConnectGaps : bool - Determines whether or not gaps (i.e. {nan} or missing values) in the provided data arrays are connected.
    ?Fill : Fill - Sets the area to fill with a solid color. Use with `fillcolor` if not "none". "toself" connects the endpoints of the trace (or each segment of the trace if it has gaps) into a closed shape.
    ?FillColor : Color - Sets the fill color. Defaults to a half-transparent variant of the line color, marker color, or marker line color, whichever is available.
    ?HoverLabel : Hoverlabel - Sets the style of the hoverlabels of this trace.
    ?UIRevision : string - Controls persistence of some user-driven changes to the trace: `constraintrange` in `parcoords` traces, as well as some `editable: true` modifications such as `name` and `colorbar.title`. Defaults to `layout.uirevision`. Note that other user-driven trace attribute changes are controlled by `layout` attributes: `trace.visible` is controlled by `layout.legend.uirevision`, `selectedpoints` is controlled by `layout.selectionrevision`, and `colorbar.(x|y)` (accessible with `config: {editable: true}`) is controlled by `layout.editrevision`. Trace changes are tracked by `uid`, which only falls back on trace index if no `uid` is provided. So if your app can add/remove traces before the end of the `data` array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a `uid` that stays with it as it moves.

Returns: 'g -> 'g

Create a function that applies the styles of a mapbox scatter plot to a Trace object

?Name : string

Sets the trace name. The trace name appear as the legend item and on hover.

?Visible : Visible

Determines whether or not this trace is visible. If "legendonly", the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).

?ShowLegend : bool

Determines whether or not an item corresponding to this trace is shown in the legend.

?LegendRank : int

Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with `"reversed" `legend.traceorder` they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items.

?LegendGroup : string

Sets the legend group for this trace. Traces part of the same legend group hide/show at the same time when toggling legend items.

?LegendGroupTitle : Title

Sets the legend group title for this trace.

?Opacity : float

Sets the opacity of the trace.

?Mode : Mode

Determines the drawing mode for this scatter trace. If the provided `mode` includes "text" then the `text` elements appear at the coordinates. Otherwise, the `text` elements appear on hover. If there are less than 20 points and the trace is not stacked then the default is "lines+markers". Otherwise, "lines".

?Ids : seq<'a>

Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.

?Lat : seq<'b>

Sets the latitude coordinates (in degrees North).

?Lon : seq<'c>

Sets the longitude coordinates (in degrees East).

?Cluster : MapboxCluster

Sets the clustering options for points on this trace.

?Text : 'd

Sets text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. If trace `hoverinfo` contains a "text" flag and "hovertext" is not set, these elements will be seen in the hover labels.

?MultiText : seq<'d>

Sets text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. If trace `hoverinfo` contains a "text" flag and "hovertext" is not set, these elements will be seen in the hover labels.

?TextPosition : TextPosition

Sets the positions of the `text` elements with respects to the (x,y) coordinates.

?MultiTextPosition : seq<TextPosition>

Sets the positions of the `text` elements with respects to the (x,y) coordinates.

?TextTemplate : string

Template string used for rendering the information text that appear on points. Note that this will override `textinfo`. Variables are inserted using %{variable}, for example "y: %{y}". Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. Every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available.

?MultiTextTemplate : seq<string>

Template string used for rendering the information text that appear on points. Note that this will override `textinfo`. Variables are inserted using %{variable}, for example "y: %{y}". Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. Every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available.

?HoverText : string

Sets hover text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. To be seen, trace `hoverinfo` must contain a "text" flag.

?MultiHoverText : seq<string>

Sets hover text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. To be seen, trace `hoverinfo` must contain a "text" flag.

?HoverInfo : HoverInfo

Determines which trace information appear on hover. If `none` or `skip` are set, no information is displayed upon hovering. But, if `none` is set, click and hover events are still fired.

?HoverTemplate : string

Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, "xother" will be added to those with different x positions from the first point. An underscore before or after "(x|y)other" will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. variable `norm` Anything contained in tag `` is displayed in the secondary box, for example "{fullData.name}". To hide the secondary box completely, use an empty tag ``.

?MultiHoverTemplate : seq<string>

Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, "xother" will be added to those with different x positions from the first point. An underscore before or after "(x|y)other" will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. variable `norm` Anything contained in tag `` is displayed in the secondary box, for example "{fullData.name}". To hide the secondary box completely, use an empty tag ``.

?Meta : string

Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace `name`, graph, axis and colorbar `title.text`, annotation `text` `rangeselector`, `updatemenues` and `sliders` `label` text all support `meta`. To access the trace `meta` values in an attribute in the same trace, simply use `%{meta[i]}` where `i` is the index or key of the `meta` item in question. To access trace `meta` in layout attributes, use `%{data[n[.meta[i]}` where `i` is the index or key of the `meta` and `n` is the trace index.

?CustomData : seq<'e>

Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, "scatter" traces also appends customdata items in the markers DOM elements

?SubPlot : SubPlotId

Sets a reference between this trace's data coordinates and a mapbox subplot. If "mapbox" (the default value), the data refer to `layout.mapbox`. If "mapbox2", the data refer to `layout.mapbox2`, and so on.

?Marker : Marker

Sets the marker of this trace.

?Line : Line

Sets the line of this trace

?TextFont : Font

Sets the text font of this trace

?SelectedPoints : seq<'f>

Array containing integer indices of selected points. Has an effect only for traces that support selections. Note that an empty array means an empty selection where the `unselected` are turned on for all points, whereas, any other non-array values means no selection all where the `selected` and `unselected` styles have no effect.

?Selected : TraceSelection

Sets the style of selected points of this trace.

?Unselected : TraceSelection

Sets the style of unselected points of this trace.

?Below : string

Determines if this scattermapbox trace's layers are to be inserted before the layer with the specified ID. By default, scattermapbox layers are inserted above all the base layers. To place the scattermapbox layers above every other layer, set `below` to "''".

?ConnectGaps : bool

Determines whether or not gaps (i.e. {nan} or missing values) in the provided data arrays are connected.

?Fill : Fill

Sets the area to fill with a solid color. Use with `fillcolor` if not "none". "toself" connects the endpoints of the trace (or each segment of the trace if it has gaps) into a closed shape.

?FillColor : Color

Sets the fill color. Defaults to a half-transparent variant of the line color, marker color, or marker line color, whichever is available.

?HoverLabel : Hoverlabel

Sets the style of the hoverlabels of this trace.

?UIRevision : string

Controls persistence of some user-driven changes to the trace: `constraintrange` in `parcoords` traces, as well as some `editable: true` modifications such as `name` and `colorbar.title`. Defaults to `layout.uirevision`. Note that other user-driven trace attribute changes are controlled by `layout` attributes: `trace.visible` is controlled by `layout.legend.uirevision`, `selectedpoints` is controlled by `layout.selectionrevision`, and `colorbar.(x|y)` (accessible with `config: {editable: true}`) is controlled by `layout.editrevision`. Trace changes are tracked by `uid`, which only falls back on trace index if no `uid` is provided. So if your app can add/remove traces before the end of the `data` array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a `uid` that stays with it as it moves.

Returns: 'g -> 'g

TraceMapboxStyle.SetMapbox(?MapboxId)

Full Usage: TraceMapboxStyle.SetMapbox(?MapboxId)

Parameters:
Returns: TraceMapbox -> TraceMapbox

?MapboxId : SubPlotId
Returns: TraceMapbox -> TraceMapbox